Analyzer interfacing list: check if your lab analyzer works with ClinikPe
Search the haematology, biochemistry, immunoassay, HbA1c, urine, electrolyte and coagulation analyzers most used in Indian labs. ClinikPe connects analyzers by protocol (ASTM, HL7 or serial), so most instruments with a working LIS output can be interfaced. Tap any model to confirm on WhatsApp.
Not on the list?
Most analyzers with an LIS port can still be connected. Send us the make, model and a photo of the back panel.
Searchable analyzer list
| Make | Model | Department | Type | ClinikPe |
|---|---|---|---|---|
| Sysmex | XP-100 | Haematology | 3-part CBC | Ask about this model |
| Sysmex | XN-350 | Haematology | 5-part CBC | Ask about this model |
| Sysmex | XN-550 | Haematology | 5-part CBC | Ask about this model |
| Sysmex | XQ-320 | Haematology | 3-part CBC | Ask about this model |
| Mindray | BC-20s | Haematology | 3-part CBC | Ask about this model |
| Mindray | BC-30s | Haematology | 3-part CBC | Ask about this model |
| Mindray | BC-5130 | Haematology | 5-part CBC | Ask about this model |
| Mindray | BC-2800 | Haematology | 3-part CBC | Ask about this model |
| Erba | H360 | Haematology | 3-part CBC | Ask about this model |
| Erba | H560 | Haematology | 5-part CBC | Ask about this model |
| Horiba | Yumizen H500 | Haematology | 5-part CBC | Ask about this model |
| Horiba | ABX Micros ES 60 | Haematology | 3-part CBC | Ask about this model |
| Agappe | Mispa Count X | Haematology | 3-part CBC | Ask about this model |
| Medonic | M51 | Haematology | 5-part CBC | Ask about this model |
| Zybio | Z3 | Haematology | 3-part CBC | Ask about this model |
| Diatron | Abacus 380 | Haematology | 5-part CBC | Ask about this model |
| Mindray | BS-240 | Biochemistry | Fully automatic | Ask about this model |
| Mindray | BS-200E | Biochemistry | Fully automatic | Ask about this model |
| Erba | EM-200 | Biochemistry | Fully automatic | Ask about this model |
| Erba | EM-360 | Biochemistry | Fully automatic | Ask about this model |
| Transasia / Erba | XL-200 | Biochemistry | Fully automatic | Ask about this model |
| Roche | Cobas c111 | Biochemistry | Compact automatic | Ask about this model |
| Meril | AutoQuant 400 | Biochemistry | Fully automatic | Ask about this model |
| Snibe | Maglumi 800 | Immunoassay | CLIA | Ask about this model |
| Snibe | Maglumi 2000 | Immunoassay | CLIA | Ask about this model |
| Roche | Cobas e411 | Immunoassay | ECLIA | Ask about this model |
| Siemens | ADVIA Centaur XP | Immunoassay | CLIA | Ask about this model |
| Beckman Coulter | Access 2 | Immunoassay | CLIA | Ask about this model |
| Tosoh | AIA-360 | Immunoassay | Enzyme immunoassay | Ask about this model |
| Bio-Rad | D-10 | HbA1c | HPLC | Ask about this model |
| Tosoh | HLC-723 G8 | HbA1c | HPLC | Ask about this model |
| Roche | Cobas u 411 | Urine | Strip reader | Ask about this model |
| Dirui | H-500 | Urine | Strip reader | Ask about this model |
| Easylyte / Medica | Easylyte | Electrolytes | ISE | Ask about this model |
| Stago | STart Max | Coagulation | Semi-automatic | Ask about this model |
| Erba | ECL 105 | Coagulation | Semi-automatic | Ask about this model |
No match in this list. Your analyzer may still work. Ask us on WhatsApp.
Model names are trademarks of their manufacturers. Interfacing depends on the unit's data-output settings and firmware, so we confirm every model before setup.
Key facts about interfacing analyzers with ClinikPe
- Approach: by protocol (ASTM, HL7, serial or file), not by brand.
- Requirement: the analyzer needs a working LIS or host output.
- Setup: remote, by ClinikPe's team, including test-code mapping. See analyzer integration.
- Confirmation: every model is checked before setup; there's no charge to ask.
How to get your analyzer connected
Five steps. The first three are on the analyzer side, and doing them early is what makes setup quick.
-
Check the analyzer has an LIS output
Look for an RS-232 serial port or a LAN port marked LIS, host or data, and for an LIS or host setting in the analyzer's menu.
-
Get the interface document
Ask the supplier for the LIS or host interface specification. It tells us the protocol, test codes and message format.
-
Enable the output
The supplier's engineer may need to switch on the LIS output. Some suppliers charge for this; ask before booking.
-
Connect and map
ClinikPe's team connects remotely and maps each analyzer test code to your ClinikPe test and parameter.
-
Test with real samples
Run a set of samples and compare analyzer printouts with ClinikPe reports before going live.
Connection types you'll find on lab analyzers
| RS-232 serial | The classic 9-pin port on many haematology and biochemistry analyzers. Needs a serial cable, or a USB-to-serial adapter, to the PC running ClinikPe's interface. |
|---|---|
| LAN / TCP-IP | A network port. The analyzer and the interface PC sit on the same local network. Common on newer analyzers and HL7 devices. |
| USB or file export | Some instruments write results to a folder or USB drive. ClinikPe can pick these files up if they follow a consistent format. |
| Middleware | Large labs sometimes run vendor middleware between analyzers and the LIS. ClinikPe connects to the middleware instead of each analyzer. |
Get your analyzers confirmed
List your analyzers and we'll confirm which can be interfaced, how, and how long setup takes. No charge, no obligation.
Questions about analyzer compatibility
Which analyzers can be interfaced with ClinikPe?
How do I know if my analyzer has an LIS output?
What is an LIS interface document?
Do I need to pay the analyzer supplier to enable
interfacing?
Can semi-automatic analyzers be interfaced?
My analyzer isn't on the list. Can it still be
connected?
About this list
Maintained by the ClinikPe product team in Kolkata. Last updated . Models are added as labs ask about them.